User Manual

Table Of Contents

OUTLOOK AND INSTALL PAPER ROLL

Mini Receipt Printer

Quick Start Guide

Cover open button

Roll paper cover

Control panel

Button name, indicator LED light and function

Method: When the printer is connect power off ,

press “FEED” button and turn on at the same

time, 2 seconds later release “FEED” button,

a completed self test will be printed out to show

printer settings.

USB Port

1 2 3 4 5

LAN Port

CASH DRAWER PORT (Rj11 CABLE)

Add IP PORT FOR DRIVER

TOOL CHANGE PRINTER IP

Cutter cover

1)Double click “Printer Test V3.3C”

2)Setting new printer IP in new IP box

3)Click “Set New IP”,after beep rings,

New IP address Successfully.

4)Other setting Click”Advanced”

(1)Set computer IP to 192.168.1.xxx

(2)Right key receipt printer in Control Panel and

choose “Printer properties”

(3)Click “Ports”and choose “Add Ports...”

(4)Click “Standard TCP/IP Port” and “New Port”

(6)Click “Next” until “Finish”.Then click “Close”

(5)Click “Next” until this.

“Printer Name or IP”,write down printer IP.

PAGE 1
Mini Receipt Printer Quick Start Guide OUTLOOK AND INSTALL PAPER ROLL Roll paper cover Control panel Cutter cover Cover open button 1 2 3 4 5 USB Port TOOL CHANGE PRINTER IP 1)Double click “Printer Test V3.3C” LAN Port Add IP PORT FOR DRIVER (1)Set computer IP to 192.168.1.xxx (2)Right key receipt printer in Control Panel and choose “Printer properties” (3)Click “Ports”and choose “Add Ports...
PAGE 2
Zy801 STEP 2 - INSTALL DRIVER 8. Choose the right series, shown as below. 1) Install driver under WINDOWS OS (Steps as below). 1. Double click driver. 6. Finished. 2. Select: Next. 3. Default installation folder. 7. Choose the right port, shown as below: 10. Choose the detect USB001,click apply, shown as below. 4. Create a shortcut on the desktop. 5. Install by below instruction.