How to install Windows driver 1. Turn on label printer,and connect to PC by USB. 2. Run “Netum Printer Driver Setup .exe”, Click “Install” button. 3.
4. Open “Devices and Printers”, choose “JPrint Y702BT ” and “Printing preferences ”. 5. You can change setting on “Page Setup” page.
How to install NETUMPrinter driver 1.Double click the NETUM NT-LP110A.dmg 2.Double click NETUMPrinter_V1.1.0_signed .pkg to install the driver. 3.Click “continue” button.
.click “Install” 5.Use Touch ID or Enter your password.
6.Click “Close” to finish. 7.Open “System Preferences”,and click “Printers and Scanners”.
8.click “+” to add a new printer. 9.
drop down menu. 10.
11.
12.Use Touch ID or enter your password. 13.Finish.
How to change the setting of the printer,and how to define label size(Priview) 1. Open a PDF file(any docment file is ok), Select “File”-->”Print”.
2. Choose “Manage Custom Sizes” under “Paper Size ” drop down menu.
2.Click “+” to define a new label size,click “OK” to save. 3.You can select the new Label “100*190”now. 4. Select “Printer Features”,then example:Speed,Darkness..
5.Click “Print”.
