User Guide

ManualsBrandsNETUM ManualsOffice ElectronicsShipping Label Printer, High-Speed 150mm/s Direct USB Thermal Barcode Printer 4×6 Shipping Label Printer Label Maker Machine Compatible with Ebay, Amazon, FedEx,UPS,Shopify,Etsy

Table Of Contents

CONTENTS

Driver Installation........................................................................................................................... - 2 -

Mac Driver..................................................................................................................................- 2 -

Windows Driver..........................................................................................................................- 8 -

Printing Issue.................................................................................................................................. - 10 -

1. Why my printed labels are not clear or dark?........................................................................- 10 -

2. Why are there some white spots in the printed labels?.........................................................- 12 -

3. Why I printed many blank labels?..........................................................................................- 12 -

4. Why the position of the print content is offset when printing continuously?.......................- 12 -

5. Why the printer is skipping labels or continuously feeding?............................................... - 13 -

6.Why the printer print extra blank labels after printing?...........................................................- 14 -

7. Why the label is getting stuck or half-printed?.....................................................................- 19 -

8. Why the printer's right light is flashing?.............................................................................. - 20 -

9. Why me label is printing sideways?....................................... .............................................. - 21 -

Platform Setup................................................................................................................................ - 23 -

1. Shopify Setup..........................................................................................................................- 23 -

2. eBay Setup............................................................................................................................ - 25 -

3. UPS WorldShip..................................................................................................................... - 28 -

4. Etsy Setup.............................................................................................................................. - 31 -

5. Amazon.com Customer Orders Setup.................................................................................... - 31 -

Tips and Tricks................................................................................................................................. - 32 -

1. How to create new customized label size.............................................................................. - 32 -

2. How to print label in nonstandard 4x6 inch size, such as USPS and Amazon ASIN labels .... - 36 -

Summary of content (39 pages)

PAGE 1
CONTENTS Driver Installation........................................................................................................................... - 2 Mac Driver..................................................................................................................................- 2 Windows Driver..........................................................................................................................- 8 Printing Issue..........................................................
PAGE 2
Driver Installation MAC Driver Please insert the USB comes with the box in to your computer. A flash drive icon will usually appear on the desktop. If a dialog box does not appear, please open the Finder and select the flash driver on the left side of the window. You can also download the latest driver here: http://www.gzxlscan.com Double click the .
PAGE 3
. Input your “Password” of your Mac. Then click “Modify Settings” . NOTE: If your Mac does not have a password, then click “Modify Settings” . 4. Click “Open”, then you can continue to install the driver. ATTENTION: Before installation please ensure the printer is connected and turned on.
PAGE 4
1. Double click the NETUM NT-LP110A.dmg 2. Double click NETUMPrinter_V1.1.0_signed .pkg to install the driver. 3.
PAGE 5
4. Open “System Preferences”,and click “Printers and Scanners”.
PAGE 6
5. Click “+” to add a new printer. 6. Turn on your printer, and choose “NETUM NT-LP110A”,select “Select Software” under “Use” 7.
PAGE 7
8. Click “Add” then finish.
PAGE 8
Windows Driver 1. You can please install the driver via included USB or download the driver from here: http://www.gzxlscan.com 2. For security reasons, the driver file is placed within zip file. Please extract/ open/ run the installer within this zip file and follow the installer steps.
PAGE 9
3. After installation, please go to "Setting" -> "Devices" -> "Printer and Scanners" for windows 10. Also, you can reach this page in windows 7 by going to Control Panel -> Devices and Printers. Right click on "NETUM NT-LP110A" and choose Printing Preferences. 4. In this page, you can adjust the parameters you need.
PAGE 10
Printing Issue (1) Q: why my labels are not sharp / dark? It may caused by following reasons; A. Label The darkness of the label depends on the quality of the label. High-quality labels will produce darker labels B. Print density and speed In the preferences of the printer "NT-LP110A", you can lower the "Density" and "Speed" to increase the resolution.
PAGE 11
For Mac: Look for drop down menu under "Printer Features".
PAGE 12
(2) Q: Why are there some white spots in the printed labels? A. It is might be the printer head has gotten dirty. (1) Please turn off the printer and allow it to cool down (2) Please use the provided alcohol pads to wipe the printer head clean. Any 70% Isopropyl Alcohol pad would work. These are commonly available in pharmacies and grocery stores as well as on Amazon. Image below shows the highlighted areas that could cause this fade / dead zone.
PAGE 13
A. Please check whether the black guide has fixed the label (5) Q: Why the printer is skipping labels or continuously feeding? The main reasons for this problem are the following. This behavior is usually after you change your label type, size, or manufacturer. A. NT-LP110A hasn’t recognize your label details [This is the most common reason] Please re-run the automatic label identification so the printer can recognize your label.
PAGE 14
Preferences -> Advanced Button. Most 4 x 6 labels are 100mm x 150mm, if you can’t find the command paper in it, you can please add a new lable size. ②For Mac Please select 100mm x 150mm or 4" x 6" size during on the print prompt window Note: The application you are using (i.e. Adobe Reader) could be over-riding your driver label setting and sending the print in a larger / smaller size to NT-LP110A. Look for "Page Setup" or "Paper Size" in the print prompt and ensure it already set to the size you want.
PAGE 15
② MacOS: If you print a 4x6 size page. In the print dialogue, please be sure to select your "Paper Size" appropriately (for example 4 x 6). 2. The size of loaded paper is smaller than the label file’s(For example, when printing 100*190mm file but using the 4x6 (100*150) size paper). For this situation, you can adjust the scales, margins in the page setup in the using browser.
PAGE 16
2 IE browser: click the ‘file’ ---> ‘page setup’ and adjust the margin 16
PAGE 17
3 FireFox: Click the ‘file’---> ‘page setup’ and you can set the scales and margins.
PAGE 18
3.
PAGE 19
(7) Q: Why the label is getting stuck or half-printed? A. NT-LP110A prints by heating the print head. If the label is stuck (generally appears in very dark things like bar codes or thick straight lines), it is most likely because you set a too high print density for the label. This would cause the label to become too hot and stick on the print head. This is because various tags react differently to the same heat. You can set the print speed to "4" and the density to "2", and then try printing again.
PAGE 20
(8) Q: Why the printer’s button is flashing? A. Red light is an indication that NT-LP110A has a problem with your label. Most likely, the printer needs to re-identify your label. Please ensure there are multiple labels available to the printer and then run the automatic label identification. Simply press and hold the top button on NY-LP110A until you hear one beep. The printer will then feed labels back and forth to learn the gap and other properties of your labels.
PAGE 21
On Windows Go to Control Panel -> Devices and Printers -> Right click on ‘NT-LP110A’ -> Printer preferences -> Go to Page Setup -> Under Orientation choose Landscape and Click Apply / Ok.
PAGE 22
PAGE 23
Platform Setup Shopify Setup Follow these simple steps to setup your Shopify to Print to NT-LP110A. Click on Settings on the left side menu. Select Shipping under Settings.
PAGE 24
Set your Shipping Label Printing to "4 x 6 label printers (DYMO or similar). Click on "Print test label" to print a sample label. Alternatively, you may update your label settings when you are purchasing postage for your order.
PAGE 25
eBay Setup NT-LP110A is fully compatible with USPS labels generated through eBay. We just need to tell eBay to print in 4 x 6 format. Note: After you follow these steps, only your new labels will be generated in 4 x 6 format. eBay will not change your previously printed labels. Currently eBay provides 4 x 6 labels only for USPS shipments. Note to IE users: Please note NT-LP110A users have reported an occasional bug on eBay with Internet Explorer / Microsoft Edge.
PAGE 26
PAGE 27
On the "Classic" Interface: • During your label creation process, please click on [Printer and label receipt preferences] • On the following pop up, you may pick any of the 4x6 label sized printers. For example, you may pick the "Zebra TLP3842 4x6" • Click "Save" and continue with the purchasing of your label.
PAGE 28
UPS WorldShip Follow below simple steps to setup your UPS WorldShip with NT-LP110A.If you haven't already done so, please download UPS WorldShip and install it on your computer.
PAGE 29
PAGE 30
PAGE 31
Etsy Setup To update your Etsy settings so it generated 4x6 shipping labels: 1 Sign in to Etsy.com. 2 Click Shop Manager. 3 Click Orders & Shipping. 4 Click View shipping labels. 5 Click Options. Select Format my labels for 4x6 Label printers. Please note that after you change the label format to 4 x 6, only new labels will be generated correctly. Kindly void any previously generated labels and create new ones. Article content source: https://help.etsy.
PAGE 32
Tips and Tricks How to create new customized label size When you load in a new direct thermal label, there are two actions that need to take place: 1) Run the automatic label identification on the printer 2) Set proper label settings on your computer. Mac: Set your custom label size In your print prompt menu, click on "Manage Custom Sizes" next to Paper Size. Enter your paper size and margins on the next window and click OK.
PAGE 33
Windows: Set Settings in your Windows Printer setting 33
PAGE 34
PAGE 35
PAGE 36
How to print label in nonstandard 4x6 inch size, such as USPS and Amazon ASIN labels 36
PAGE 37
Open the PDF in Adobe Reader From the top panel , select View > Rotate View > Clockwise So that the labels are side by side 37
PAGE 38
Next, from the top panel , select Edit > Take a Snapshot. Then click and drag over one of the labels. Click print Please ensure that You select the label printer form the printer menu. Shrink oversized pages is selected Choose paper source by PDF page size is unchecked. Auto portrait/landscape is selected Go to Page Setup...and ensure that your page size is the one you need. 4’X6’label is approximately 100X150mm.
PAGE 39
Still have a question or concern? NETUM support is available by phone、email and remote desktop. For more details, you c an please contact via www.gzxlscan.