User's Manual

CC2430 Programming instruction
CC2430 has a adjusting interface which allows program Flash inside .
Adjust interface pin: P2_1 (Debug Data)
P2_2 (Debug Clock)
Reset
CC2430DB board or CC2430EB board can be used to program with RF Module or
USB Dongle device. Just to connect the interface shown in below figure with the
corresponding pin of RF module or USB dongle is O.K. .
Programming file : HEX file
CC2430
C8051
USB
Interface
ANTENNA
DB Board
Debug Interface
DD(P21)
DC(P22)
Reset
3.3V
GND