User's Manual

control code Sequence

number

identifier

Count NodeID RSSI

… NodeID RSSI

0x05 0x109F 0x5F

Byte 2byte Signed

(Clusterid：0x FE60)

5-8. HeartBeat Technique

In a security system, it is important that Zone devices report the conditions to the central security unit (the

CIE device). To meet this need, Netvox came up with a technique called “HeartBeat”.

Right after Z308 enrolls to a security system, it sends a HeartBeat signal to the CIE device. Afterward, it will

send HeartBeat data every hour by default settings.

5-9. Battery

When the operating voltage is lower than 2.1V, the indicator will flash red once. Z308 will send a low-power

report to the ZigBee network.

The related data:

y Power configuration cluster (ID:0x0001)

y Battery voltage attribute (ID:0x0020)

5-10. Restore to Factory Setting

To restore it to factory setting, please follow the steps:

Step1. Press and hold the Panic Button or 15 seconds.

Step2. Release the button after the indicator shows fast red flashes.

Step3. After 10 red flashes, it will go into turn-off mode. The indicator will be Off.

6. Home Automation Clusters for Z308

A cluster is a set of related attributes and commands which are grouped together to provide a specific function. A

simple example of a cluster would be the On/Off cluster which defines how an on/off switch behaves. This table

lists the clusters which are supported by Z308.

1.End Point(s)：0x01:

2.Device ID：IAS Zone（0x0402）

3.EndPoint Cluster ID

Cluster ID for Z308

Server side Client side

EP 0x01 (Device ID: IAS Zone(0x0402) )