User's Manual

4. Installation Diagram

5. Setting up ZB02C

5-1. Turn On ZB02C

For power saving, ZB02C is designed to get into sleeping mode when there is no activity for 2 minutes.

To manually turn on ZB02C, press the Binding Key once.

y When ZB02C is first time used or after resetting → it will try to join the network.

y When ZB02C is in a ZigBee network → it will send out the device data, like IEEE address/Network

address, and the indicator will flash 5 times. ZB02C will be activated for 2 minutes.

y When ZB02C was in a ZigBee network, but by any change it is offline → it will start to rejoin the

ZigBee network.

Insert the batteries

Install the cover