Orb Cam Mini Quick Guide NI-3421
Catalogue 1. Warning P. 1 2. What’s In The Box P. 2 3. Camera Structure P. 3-4 4. Read Before Installing P. 5 5. Set Up With Netvue App P. 6 6. Mount Your Orb Cam Mini 7. Netvue Protect Plan P. 7-10 P.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
What’s In The Box Orb Cam 2 Quick Guide Quick Guide Mounting Bracket Hex Bolt Ejector Pin X2 Drilling Template Anchors X2 Mounting Screws Power Adapter Orb Cam Mini 2
Camera Structure Micro SD Card Slot Wi-Fi Configuration Hole Microphone Light Sensor Lens Front 3
Antenna Speaker Power Port Back 4
Read Before Installing 1. Keep Orb Cam Mini and all accessories out of reach of children and pets. 2. Orb Cam Mini comes with a power adapter. If you prefer other power adapters, please make sure that they allow a DC5V power supply voltage. 3. Working temperature: -10°C to 50°C (14°F to 122°F) Working relative humidity: 0-95% 4. Please do not expose the camera lens to direct sunlight. Note: 1. Netvue Orb Cam Mini only works with 2.4GHz Wi-Fi. 2.
Set Up With Netvue App Download Netvue App from App Store or Google Play. Follow the in-app instruction to complete the entire set up process.
Mount Your Orb Cam Mini If you are going to install camera on wood, just skip this step. If you are going to intall camera on concrete or brick: 1 2 1. Use the provided drilling template to mark the position of holes on your wall. Use drill bit (15/64", 6mm) to drill two holes, and then install anchors to hold screws.
2 1 2. Install the Mounting Bracket with the Screws provided. And then place the Hex Bolt into the Mounting Bracket.
1 2 3. Tighten Orb Cam Mini to the Hex Bolt.
355° 90° 4.Now you can turn around your Orb Cam Mini horizontally and vertically using Netvue App.
Netvue Protect Plan Netvue Protect Plan provides optional advanced features for those with higher security needs, and each plan supports multiple devices. Continuous Video Recording Event Video Recording Human Detection ... Visit my.netvue.com to learn more.
Feel free to contact us for additional help: support@netvue.com @NetvueTech 1(866)749-0567 Netvue Forum netvue.com/community in-App Chat www.netvue.
