- NETWORK TECHNOLOGIES INCORPORATED Installation and Operation Manual

17
Find Host Adapter
When the user presses <F> from the Command Mode menu, the Find Host Adapter screen will appear, with the following search
criteria to choose from:
¾ N- Name- to search by name
¾ I - Index- to search by index number
¾ U- Unique ID- to search by the unique
identification number
¾ C- Comment- to search by words in the
comment field of the Host Adapter info screen
Figure 15- Find Host Adapter screen
To continue, press a letter, then type in the value of the chosen parameter.
Function Keystroke Value or Action
Name N type in the name of the Host Adapter, up to 16 characters, case sensitive
Index I type in the index number for the Host Adapter
Unique ID U type in the Unique ID value of the Host Adapter
Comment C type in the case sensitive comment, up to 32 characters.
Exit Esc To cancel the search and return to the Command Mode menu
FYI: If the wrong characters are entered, use the <Backspace> key to remove and edit characters to submit for search.
The first match to the characters submitted will be displayed as the parameter value is entered.
Host Adapter Info screen
To display the selected Host Adapter Info screen, press <I> from the Command Mode menu.
FYI: If there are no Host Adapters configured, the information screen for the User Station will be displayed instead.
This screen displays the following information:
Item Description
Name The name of the Host Adapter
Comment could be used to decribe the location
of the Host Adapter
Unique ID a value unique to the segment
Master ID the segment 's Master ID
Index number used in the index of the
Command Mode menu
Revision ROM version, used to identify the
Host Adapter firmware version
installed
Type PS2, SUN,or USB (Identifies the
type of Host Adapter connected)
CodeCRC ROM CRC, use for identification
purposes
HostID An internal serial number
Figure 16- Host Adapter Info screen