User Guide

Edit Mode

To activate Edit Mode press <Ctrl> + <E> from the Command Mode menu.

Edit Mode allows only the administrator to modify the names of the CPUs connected to the switch. Names of CPUs can be up to

12 characters in length. Characters typed can be upper or lower case. After changes have been made the administrator will be

prompted by the menu to save the changes. Answer "Y" to save changes and answer "N" to continue using previously entered

port names.

Function: Keystroke:

Move cursor one position

to the right

Move cursor one position

to the left

Move cursor to the

previous port

Move cursor to the

next port

Select the first port on the switch

Select the last port on the switch

Toggles between insert and

overstrike

Erase current character

Erase previous character

When finished making changes in Edit Mode, press <Esc> and a prompt will appear to press either <Y> to save the changes or

<N> to continue making changes without saving the changes just made.

Search Mode

Search Mode is enabled by typing any alphabetical or numeric characters while in the Command Mode menu.

Search Mode allows the user to enter and maneuver through a list of CPU names. The CPU name best matching the characters

typed is selected. The list of CPUs may also be searched for a specific (or similar) name. The following commands are valid when

the search option has been invoked from Command Mode.

Function: Keystroke:

Erase previous character

in search name

Select the previous port

NOTE: If a change has been made, using the up or down arrow

will also prompt the user to save any changes.

End

Home

Insert

Character either gets inserted and the remaining

characters shift to the right, or characters get

overwritten.

Delete

Backspace