Operation Manual

NX-10 User Manual 24
Reading the event log
1. Scroll to Log Review and press OK. The last event added to the log is
shown.
2. In this case, an alarm occurred in zone 48 in partition 3 (Warehouse) at
17:32 on September 25
th
. No report was sent to the central station.
3. Press F5 (
 ) to scroll horizontally and view the rest of the event
description.
4. In this case, the alarm occured in zone 168 (with the assigned zone
name Office). This is the 28
th
event in the log.
5. Press the  keys to scroll through the events in the log.
The event log displays the details of all the events that occur from when you turn your system on. The event description is as follows:
L1:
L2:
Event Type:
PN:
Partition Name:
Zone/User Name:
UN/ZN:
HH:MM:
DD/MM:
LOG:
Event Type PN Partition Name
HH:MM DD/MM UN/ZN Zone/User Name LOG
The type of event that occurred.
The number of the partition in which the event occurred.
The name of the partition in which the event occurred.
The zone name or user name.
The user number, zone number or device number.
The hour and the minute the event occurred.
The day and month the event occurred.
The position of the event in the event log.
To read the event log, press OK and enter a master user code.

OK
Alarm P3 Warehouse
17:32 25/09 48


Warehouse
48 Office 028
........
........
........
........
........