User Manual

N6013

SAVE THIS INSTRUCTION MANUAL FOR FUTURE PEFERENCE.

电动钉枪

Electric tacker

ElektElektrotacker

Agrafeuse électrique

Pistola sparachiodi elettrica

Grapadora eléctrica

Pistola de pregos elétrica

Степлер электриуеский

電気タッカー

Stapler listrik

PAGE 1
N6013 CN 电动钉枪 EN Electric tacker DE ElektElektrotacker FR Agrafeuse électrique IT Pistola sparachiodi elettrica ES Grapadora eléctrica PT Pistola de pregos elétrica RU Степлер электриуеский JP 電気タッカー ID Stapler listrik SAVE THIS INSTRUCTION MANUAL FOR FUTURE PEFERENCE.
PAGE 2
1 N6013 120VAC 60Hz 20pcs/min staple:TYPE 50 Nail:TYPE F 1.
PAGE 3
6 A 2 C B 3 D 1 7 8 3
PAGE 4
9 G ! 0 @ 4 +
PAGE 5
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. 3) PERSONAL SAFETY a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
PAGE 6
• Operating the tool 8 - firmly press tacker head D against the workpiece until it is pushed in a few millimeters - briefly press switch E and then release again - switch F is locked as long as you do not press tacker head E against the workpiece, thus preventing accidental operation - At 20 shots/min,tacker should be allowed to cool down after 30 minutes as it is only rated for short-time duty. g) Use the power tool, accessories and tool bits etc.