Installation Manual

If you loosed this two

bolts, inside springs and

the bracket of slider will

pop up together.

There is two location pillars

inside the bracket for

installing the springs, we

must place the spring on the

location pillar as right photo.

After the two springs were

installed to location pillars ,

then hold the springs and

insert them into the slots

on the slider as right photo.

PAGE 1
If you loosed this two bolts, inside springs and the bracket of slider will pop up together. There is two location pillars inside the bracket for installing the springs, we must place the spring on the location pillar as right photo. After the two springs were installed to location pillars , then hold the springs and insert them into the slots on the slider as right photo.
PAGE 2
Insert the two springs to the slot slowly and completely. then locked the slider as right photo. Tighten the bolt with wrength, the slider assembly done.