User Guide

Jam clear instruction

No-marring tip

Wrench

Pull out the No-marring Tip, Loose the

two bolts with the wrench on tool.

Take off the outer panel, contact safety

pole and the middle panel , keep these

parts for reassembly.

Remove the jammed brad nail, place back

the middle panel, contacted safety pole.

Middle panel

Contact

safety

pole

PAGE 1
Jam clear instruction No-marring tip Wrench Pull out the No-marring Tip, Loose the two bolts with the wrench on tool. Take off the outer panel, contact safety pole and the middle panel , keep these parts for reassembly. Middle panel Contact safety pole Remove the jammed brad nail, place back the middle panel, contacted safety pole.
PAGE 2
outer panel Spring washer Two bolts Place back the outer panel, two spring washers and bolts and tighten the bolts by hand first. Tighten the two bolts with wrench, assembly the No-marring tip. Check there is no gap between middle panel and magazine, the gap will cause to double brad nail.