EN User Manual Hob IH601FL
Contents Safety information Safety instructions Product description Daily use Hints and tips Care and cleaning 2 3 5 6 8 10 Troubleshooting Installation Technical information Energy efficiency GREAT BRITAIN – Customer Care and Service 10 12 14 15 15 Subject to change without notice. Safety information Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages.
• • • • • • • Never try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Do not use a steam cleaner to clean the appliance. After use, switch off the hob element by its control and do not rely on the pan detector.
• • • • • Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation. If the mains socket is loose, do not connect the mains plug. Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
Product description Cooking surface layout 1 Induction cooking zone 2 Control panel 1 1 180 mm 180 mm 210 mm 145 mm 1 1 2 Control panel layout 1 2 3 9 8 4 5 7 6 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor field Function Comment 1 ON / OFF To activate and deactivate the hob. 2 Lock / The Child Safety Device To lock / unlock the control panel. 3 - Heat setting display To show the heat setting.
Sensor field 8 Comment - To select the cooking zone. / - To increase or decrease the time. / - To set a heat setting. Power function To activate and deactivate the function. 6 7 Function 9 Heat setting displays Display Description The cooking zone is deactivated. - / - The cooking zone operates. Automatic Heat Up function operates. Power function operates. + digit There is a malfunction. A cooking zone is still hot (residual heat). Lock / The Child Safety Device function operates.
• • • etc.). An acoustic signal sounds and the hob deactivates. Remove the object or clean the control panel. the hob gets too hot (e.g. when a saucepan boils dry). Let the cooking zone cool down before you use the hob again. you use incorrect cookware. The symbol comes on and the cooking zone deactivates automatically after 2 minutes. you do not deactivate a cooking zone or change the heat setting. After some time comes on and the hob deactivates.
Lock • You can lock the control panel while cooking zones operate. It prevents an accidental change of the heat setting. • • Set the heat setting first. To activate the function: touch seconds. The Timer stays on. . To deactivate the function: touch heat setting comes on. comes on for 4 • • . The previous Each phase has a maximum electricity loading of 3700 W. The function divides the power between cooking zones connected to the same phase.
Cookware dimensions Induction cooking zones adapt to the dimension of the bottom of the cookware automatically to some limit. The cooking zone efficiency is related to the diameter of the cookware. The cookware with a smaller diameter than the minimum receives only a part of the power generated by the cooking zone. Refer to “Technical information” chapter. The noises during operation If you can hear: • • • humming: you use high power level. • clicking: electric switching occurs.
Care and cleaning Cleaning the hob Warning! Refer to Safety chapters. • General information • • • • • Clean the hob after each use. Always use cookware with clean bottom. Scratches or dark stains on the surface have no effect on how the hob operates. Use a special cleaner applicable for the surface of the hob. Use a special scraper for the glass. • Remove immediately: melted plastic, plastic foil, and food with sugar. If not, the dirt can cause damage to the hob.
Problem Automatic Heat Up function does not operate. Possible cause Remedy The zone is hot. Let the zone become sufficiently cool. The highest heat setting is set. The highest heat setting has the same power as the function. The heat setting changes between two levels. Power management function operates. Refer to "Daily use" chapter. The sensor fields become hot. The cookware is too large or you put it too near to the controls. Put large cookware on the rear zones if possible. comes on.
Installation Warning! Refer to Safety chapters. Connection cable • Before the installation Before you install the hob, write down the information bellow from the rating plate. The rating plate is on the bottom of the hob. Serial number ........................... Built-in hobs Only use the built-in hobs after you assemble the hob into correct built-in units and work surfaces that align to the standards. Assembly min. 500mm min. 50mm min.
min. 2 mm min. 2 mm A B < 20 mm B > 20 mm min. 500 mm A 12 mm 28 mm 38 mm A B 57 mm 41 mm 31 mm min 30 mm min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min.
min. 12 mm min. 2 mm Protection box If you use a protection box (an additional accessory), the front airflow space of 2 mm and the protective floor directly below the hob are not necessary. The protection box accessory may not be available in some countries. Please contact your local supplier. You can not use the protection box if you install the hob above an oven. Technical information Rating plate Modell IH601FL Typ 58 GAD D5 AU Induction 7.4 kW Ser.Nr. .................
Cooking zones specification Cooking zone Nominal power (maximum heat setting) [W] Power function [W] Power function maximum duration [min] Cookware diameter [mm] Left front 2300 3700 10 180 - 210 Left rear 1800 - - 145 - 180 Right front 1400 2500 4 125 - 145 Right rear 1800 - - 145 - 180 The power of the cooking zones can be different in some small range from the data in the table. It changes with the material and dimensions of the cookware.
guarantee conditions and exclusions please visit our Customer Care Department www.benchmarxjoinery.co.uk. instruction booklet before contacting us for service. Servicing and/or installation of your product should be carried out by a suitably qualified engineer. In the user manual you will find some useful information on how to deal with minor faults and how to take care of your product.
867312248-B-152015