User manual

Using detergent and additives
1. Measure out the
detergent and the fabric
conditioner.
2. Put the detergent and
the fabric conditioner
into the compartments.
3. Carefully close the
detergent drawer.
Detergent compartments
Detergent compartment for prewash
phase.
Detergent compartment for washing
phase.
Compartment for liquid additives
(fabric conditioner, starch).
Setting a programme
1. Turn the programme knob to switch the appliance
on and set the programme:
• The indicator of the button Start/Pause
flashes.
• The display shows the programme duration.
2. If necessary, change the spin speed or add
available options. When you activate an option, the
indicator of the set option comes on.
To reset a programme or switch the machine off, turn
the programme knob to position.
If you set something incorrect, the
display shows the message .
Starting a programme without the delay start
Press the button Start/Pause.
• The indicator of the button Start/Pause stops to
flash and stays on.
• The programme starts, the door locks, the
indicator Door is on.
• The programme time decreases with steps of
one minute.
The drain pump can operate for a short
time at the beginning of the washing
cycle.
Starting a programme with the delay start option
1. Press the button Delay Start again and again until
the display shows the delay you want to set. The
delay start indicator comes on.
2. Press the button Start/Pause:
• The door is locked and the indicator Door is on.
• The appliance starts the countdown.
• When the countdown is completed, the
programme starts automatically.
You can cancel or change the set of the
Delay Start option before you press the
button Start/Pause. After pressing the
button Start/Pause you can only cancel
the Delay Start option.
To cancel the Delay Start option:
a. Press the button Start/Pause to set the
appliance to pause. The indicator of button
Start/Pause flashes.
b. Press the button Delay Start until the display
shows .
Press the button Start/Pause again to start the
programme immediately.
Cancelling a running programme
1. Turn the programme knob to position OFF to
cancel the programme and to deactivate the
appliance.
2. Turn the programme knob again to activate the
appliance. Now, you can set a new washing
programme.
Before starting the new programme the
appliance could drain the water. In this
case, make sure that the detergent is still
in the detergent compartment, if not fill
the detergent again.
Interrupting a programme and changing the
options
You can change only some options before they operate.
1. Press the button Start/Pause.
The indicator flashes.
2. Change the options.
3. Press the button Start/Pause again.
The programme continues.
Opening the door
While a programme or the Delay Start operates, the
appliance door is locked. The indicator Door is on.
13