User manual

Adjust the anti-tilting device so that the distance from
the counter is 10mm. Loosen the nut counterclockwise
with a 3mm wrench. Adjust the height and turn the nut
clockwise to fix it.
~10mm
Preparation and assembly of the door
The appliance is originally prearranged for the assembly
of a door opening from right to left (see picture below)
Door
• - width 595-598 mm
• - thickness 16-22 mm
The height X depends on the height of the adjacent
furniture's base.
Ø 35 mm
14 mm
16-22 mm
22±1,5 mm
416
mm
X
595-598 mm
Hinges
To mount the hinges drill two holes (dia. 35 mm, depth
12.5-14 mm depending on the depth of door furniture)
on the inner side of the door.
To fix the hinges to the door use the screws for wood 1
and 2 supplied with the appliance (see below).
25