User manual

people who are allergic to detergents, and in areas
where the water is very soft.
Drying Time
If you wish to carry out a timed drying programme,
press this button until the drying time you want appears
on the display according to the fabrics (cottons or syn-
thetics) you have to dry. For Cottons you can select a
drying time from 10 minutes to 250 minutes (4.10). For
Synthetics you can select a drying time from 10 mi-
nutes to 130 minutes (2.10). Every time you press this
button the drying time increases by 5 mins.
Easy Iron
By selecting this option the laundry is gently washed
and spun to avoid any creasing. In this way ironing is
easier. Furthermore the machine will perform some ad-
ditional rinses in some programmes. On cotton pro-
grammes the maximum spin speed is reduced auto-
matically.
Start Pause
This button allows you to start or to interrupt the selec-
ted programme.
Delay Start
The programme can be delayed from 30 min - 60 min -
90 min, 2 hours and then by 1 hour up to a maximum
of 20 hours by means of this button.
Door light
The pilot light 9 illuminates when the programme starts
and indicates if the door can be opened:
• light on: the door cannot be opened. The machine is
working or has stopped with water left in the tub.
• light off: the door can be opened. The programme is
finished or the water has been emptied out.
• light blinking: the door is opening in a few minutes.
10 Display
10.1 10.2
The display shows the following information:
10.1 Child safety lock
This device permits you to leave the appliance unattended during it's functioning.
10.2 • Duration of the selected programme
After selecting a programme, the duration is displayed in hours and minutes (for example
). The duration is calculated automatically on the basis of the maximum recommended load for
each type of fabric. After the programme has started, the time remaining is updated every mi-
nute.
• Selected drying time
After selecting a drying programme the drying time is shown in minutes or hours and minutes.
After the programme has started, the time remaining is updated every minute.
• Delayed start
The Selected delay set by pressing the relevant button appears on the display for a few seconds,
then the duration of the selected programme is displayed again. The delay time value decreases
by one unit every hour and then, when 1 hour remains, every minute.
7