User manual

Compartment for liquid additives (fabric softener, starch).
Follow the product manufacturer’s recommendations on quantities to use and do not exceed the «MAX» mark in
the detergent dispenser drawer. Any fabric softener or starching additives must be poured into the compartment
before starting the wash programme.
Control panel
Below is a picture of the control panel. It shows the programme selector dial as well as the buttons and pilot
lights. These are presented by relevant numbers on the following pages.
1 2 3 4 5 6
B
C
A
7
1
Programme selector dial
2
SPIN reduction button
3
OPTIONS button
4
EXTRA RINSE button
5
START/PAUSE button
6
DELAY START button
7
Indicator pilot lights
Programme selector dial, spin speed button and available options
Programme Selector Dial
It allows you to switch the appliance on/off and/or to
select a programme.
Available options:
Spin
By pressing this button you can change the spin speed
of the set programme or select the available option(s).
Rinse hold
By selecting this function the water of the last rinse is
not emptied out to prevent the fabrics from creasing.
Before opening the door it will be necessary to empty
out the water. To empty out the water, please read the
paragraph «At the end of the programme».
Prewash
By selecting this option the machine performs a pre-
wash cycle before the main wash phase. The washing
time will be prolonged. This option is recommended for
heavily soiled laundry.
Quick
A very short cycle for lightly soiled items or for laundry
which needs only freshening up. We recommend you
to reduce the fabrics loading.
Extra Rinse
This appliance is designed to save energy. If it neces-
sary to rinse the laundry using an extra quantity of wa-
ter (extra rinse), select this option. Some additional rin-
ses will be performed. This option is recommended for
people who are allergic to detergents, and in areas
where the water is very soft.
Start Pause
This button allows you to start or to interrupt the selec-
ted programme.
5