User manual Dishwasher IDSH601W
Contents Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Options _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 4 4 4 5 6 Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Care and cleaning _ _ _ _ _ _ _ _ _ _
Warning! Dangerous voltage. If the water inlet hose is damaged, immediately • disconnect the mains plug from the mains socket. Contact the Service to replace the water inlet hose. Use • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments – Farm houses – By clients in hotels, motels and other residential type environments – Bed and breakfast type environments.
Product description 1 Lower spray arm 2 Filters 3 Rating plate 4 Rinse aid dispenser 9 8 7 6 5 Detergent dispenser 6 Salt container 12 7 Water hardness dial 8 Upper spray arm 2 5 3 4 9 Upper basket Control panel 1 2 4 1 On/off button 2 Programme indicators 3 3 Indicators 4 Programme button. Indicators Description End indicator. Salt indicator. This indicator is off while the programme operates.
Degree of soil Type of load Programme1) 3) 4) Programme phases Duration (min) Energy (kWh) Water (l) Heavy soil Crockery, cutlery, pots and pans Prewash Wash 70 °C Rinses Dry 85 - 95 1.8 - 2.0 18 - 20 Fresh soil Crockery and cutlery Wash 65 °C Rinse 30 0.8 9 All Prewash 12 0.1 5 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the programme duration and the consumption values.
Before first use 1. Make sure that the set level of the water softener agrees with the water hardness in your area. If not, adjust the water softener. Contact your local water authority to know the water hardness in your area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Processing residues can stay in the appliance. Start a programme to remove them. Do not use detergent and do not load the baskets.
How to adjust the level of the water softener 1. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode, refer to “Setting and starting a programme”. 2. Press and hold the programme button until the indistarts to flash and the indicacator comes on. tor 3. Wait until the indicator goes off and the end indicator starts to flash (the indicator continues to flash). 4. Press the programme button. • The end indicator flashes intermittently.
max max A + X + 3 MA 4 4 3 1 1 2 X 4 2 3 Fill the rinse aid dispenser when the lens (A) is clear. 1 MA X + MA 2 3 4 To adjust the released quantity of rinse aid, turn the selector between position 1 (lowest quantity) and position 4 (highest quantity). Daily use 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode, refer to ’Setting and starting a programme’.
2. Set the rinse aid dispenser to the lowest position. 4. Close the appliance door. The programme starts. If you stop to use the combi detergent tablets, before you start to use separately detergent, rinse aid and dishwasher salt, do these steps: Opening the door while the appliance operates 1. Press the on/off button to activate the appliance. 2. Set the water softener to the highest level. 3. Make sure that the salt container and the rinse aid dispenser are full. 4.
Do not use more than the correct quantity of detergent. Refer to the instructions on the detergent packaging. Loading the baskets Refer to the supplied leaflet with examples of the load of the baskets. • Only use the appliance to wash items that are dishwasher-safe. • Do not put in the appliance items made of wood, horn, aluminium, pewter and copper. • Do not put in the appliance items that can absorb water (sponges, household cloths). • Remove remaining food from the items.
Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object. D A 5 Put filter (A) to its initial position. Make sure that it assembles correctly under the two guides (D). 6 Assemble filters (B) and (C). Put them into position in filter (A). Turn the handle clockwise until it locks. External cleaning Clean the appliance with a moist soft cloth. Only use neutral detergents.
Problem Possible solution Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter in the inlet hose is not clogged. Make sure that the inlet hose has no kinks or bends. The appliance does not drain the water. Make sure that the sink spigot is not clogged. Make sure that the drain hose has no kinks or bends. The anti-flood device is on.
Environment concerns Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with GB the household waste. Return the product to your local recycling facility or contact your municipal office. • Discard correctly the packaging material. Recycle the materials with the symbol .
156966930-B-262013
