TLM 102 Bedienungsanleitung 2 Operating Manual 6 georg neumann gmbh · leipziger str. 112 · 10117 berlin · germany tel +49 (0)30 / 41 77 24-0 · fax -50 · headoffice@neumann.com · www.neumann.
1. Do not use solvents or aggressive cleansers for cleaning purposes. Introduction This manual contains essential information for the operation and care of the product you have purchased. Please read the instructions carefully and completely before using the equipment. Please keep this manual where it will be accessible at all times to all current and future users. Dispose of the equipment in accordance with the regulations applicable to the respective country. 3.
Connecting the microphone Caution: An incorrect supply voltage can damage the microphone! Attach the microphone only to a power supply unit, a microphone preamplifier, a mixing console or other equipment which has phantom power with 48 V (P48), in accordance with IEC 61938. Any P48 power supply equipment can be used which supplies at least 3.5 mA per channel.
7.
The microphone has a balanced, transformerless output. The 3-pin XLR connector has the following standard pin assignments: Pin 1: Pin 2: Pin 3: 0 V/Ground Modulation (+phase) Modulation (–phase) 9. Selected Accessories* (see photos in appendix) Elastic Suspensions EA 1 ..........................ni ..................Cat. No. 008449 EA 1 mt .....................blk ................Cat. No. 008450 Auditorium Hanger MNV 87 ....................ni ..................Cat. No. 006804 MNV 87 mt ...............
10 EA 1 (mt) MNV 87 DS 120 SG 2 MF 4 WS 2 PS 15 N 248 IC 3 mt IC 4 (mt) AC 25
10. Frequenz- und Polardiagramme 10.
Haftungsausschluss Die Georg Neumann GmbH übernimmt keinerlei Haftung für Folgen eines unsachgemäßen Gebrauchs des Produkts, d.h. die Folgen eines Gebrauchs, der von den in der Bedienungsanleitung genannten technischen Voraussetzungen abweicht (z.B. Bedienungsfehler, mechanische Beschädigungen, falsche Spannung, Abweichung von empfohlenen Korrespondenzgeräten).
