User's Manual
MA 1 – Automatic Monitor Alignment | 15
Performing the MA 1 – Automatic Monitor Alignment
Starting the measurement
The soware will now start measuring the loudspeakers in your system. For that purpose, sine
sweep signals will be played out to every individual loudspeaker/subwoofer.
X
Follow the instructions on the screen.
X
Step back or to the side.
X
Remain quiet.
X
Start measuring at the main listening position with the microphone on a stand in an upright
position.
X
Any loudspeakers which are not playing signals will be muted and shown in red.
We highly recommend performing the measurements at every proposed microphone position
in order to ensure the best possible results.
However, it is possible to skip the measuring procedure aer each of the 7 measurements. This
might be useful if any potential for improvement in terms of repositioning the loudspeakers or
other optimizations have been identied.