Manual

12 13
Series 180
MF 5 ................... gr ............... Cat. No. 08489
Floor stand with grey soft-touch powder coating.
It has a non-skid sound-absorbing rubber disk at-
tached to the bottom. The stand connection has a
3/8" thread. Weight 2.7 kg, Ø 250 mm.
STV 4 .................. blk ............. Cat. No. 06190
STV 20 ............... blk ............. Cat. No. 06187
STV 40 ............... blk ............. Cat. No. 06188
STV 60 ............... blk ............. Cat. No. 06189
The STV... stand extensions are screwed between
microphone stands (for example MF 4, MF 5) and
swivel mounts (for example SG 21/17 mt).
Length 40, 200, 400 or 600 mm. Ø 19 mm.
Auditorium Hangers
MNV 21 mt .......... blk ............. Cat. No. 06802
The auditorium hanger adjusts the tilting angle of
a microphone suspended by its own cable. The
MNV 21 consists of the tilting clamp, suitable to
hold a Neumann miniature microphone or KMR 81,
and a locking cable strain relief.
The MNV 21 mt allows the microphone tilt to be
adjusted with the microphone freely suspended
from its own cable.
Elastic Suspension
Elastic suspension is recommended to prevent the
microphone from being exposed to strong mechan-
ical vibrations caused by structure borne shock
waves.
EA 2124 A mt ...... blk ............. Cat. No. 08433
The EA 2124 A mt is able to accept microphones
from 21 to 24 mm in diameter. It has a swivel
mount with a 5/8"-27 female thread, plus a thread
adapter to connect to 1/2"- and 3/8" stands.
Windshields
Close range sounds, wind, and fast movements of
the microphone boom, all may cause interfering
noises. To avoid these unwanted sounds, wind-
screen accessories are available. Typically, they
are made out of open-cell polyurethane foam.
These windscreens do not cause interfering reso-
nances and do not influence the directional pat-
tern. Only in the upper frequency range is the out-
put level slightly attenuated.
The wind noise attenuation was measured with-
out electrical filtering in a turbulent air stream
traveling at 20 km/h, generated by a noiseless
wind machine.
WNS 100 ............. blk ............. Cat. No. 07323
(included in the supply schedule)
WNS 100 ............. red ............. Cat. No. 07324
WNS 100 ............. green ......... Cat. No. 07325
WNS 100 ............. yellow........ Cat. No. 07326
WNS 100 ............. blue ........... Cat. No. 07327
WNS 100 ............. white .......... Cat. No. 07328
Windscreen for KM 100 and Series 180. Wind noi-
se attenuation 18 dB. Attenuation at 15 kHz 2 dB.
Ø 45 mm.
WNS 110 ............. blk ............. Cat. No. 08535
Acoustically transparent wind and pop protection
for KM 100 and Series 180 with improved efficien-
cy. Wind noise attenuation 21 dB. Attenuation at
15 kHz 1 dB. Ø 45 mm, length 70 mm. Color black.
WS 100 ............... blk ............. Cat. No. 06751
Windscreen for KM 100 and Series 180. Wind
noise attenuation 23 dB. Attenuation at 15 kHz
approx. 4 dB. Ø 90 mm. Color black.
Popscreen
Pop screens provide excellent suppression of so-
called pop noise. They consist of a round, thin
frame covered with black gauze on both sides.
A gooseneck of about 30 cm (12") in length is
mounted at the popshield. It will be attached to
microphone stands by means of a clamp with a
knurled screw.
PS 15 .................. blk ............. Cat. No. 08472
The frame is 15 cm in diameter.
*)
Further articles are described in the catalog “Accessories”.
MF 5 ................... gr ............. Best.-Nr. 08489
Der Mikrophonfuß MF 5 hat eine graue Soft-Touch
Pulverbeschichtung und steht gleitfest und tritt-
schalldämmend auf einem Gummiring. Der Stativ-
anschluss hat ein 3/8"-Gewinde. Gewicht 2,7 kg,
Ø 250 mm.
STV 4 .................. sw ............ Best.-Nr. 06190
STV 20 ............... sw ............ Best.-Nr. 06187
STV 40 ............... sw ............ Best.-Nr. 06188
STV 60 ............... sw ............ Best.-Nr. 06189
Die Stativverlängerungen STV ... werden zwischen
Mikrophonständer (z.B. MF 4, MF 5) und Stativge-
lenk (z.B. SG 21/17 mt) geschraubt.
Die STV ... haben eine Länge von 40, 200, 400
oder 600 mm. Ø 19 mm.
Mikrophonneigevorrichtungen
MNV 21 mt .......... sw ............ Best.-Nr. 06802
Die Neigevorrichtung ermöglicht die Einstellung
der Mikrophonneigung bei frei am Kabel hängen-
dem Mikrophon. Die MNV 21 mt besteht aus einer
schwenkbaren Klammer zur Aufnahme eines Klein-
mikrophons oder KMR 81 und aus einer Kabelfüh-
rung mit Drehverschluss.
Die MNV 21 mt ermöglicht die Einstellung der
Mikrophonneigung bei frei am Kabel hängendem
Mikrophon.
Elastische Aufhängung
Um mechanische Erschütterung fernzuhalten, emp-
fiehlt sich die Verwendung einer elastischen Mi-
krophonaufhängung.
EA 2124 A mt ...... sw ............ Best.-Nr. 08433
Die EA 2124 A mt kann Mikrophone mit Durchmes-
sern von 21 bis 24 mm aufnehmen. Der schwenk-
bare Gewindeanschluss hat 5/8"-27-Gang, mit Ad-
apter für 1/2"- und 3/8"-Stative.
Windschirme
Zum Vermeiden von Störgeräuschen, die bei Nah-
besprechung, Windeinfluss oder z.B. bei schnellem
Schwenken des Mikrophongalgens auftreten kön-
nen, sind Windschutzeinrichtungen aus offenpori-
gem Polyurethanschaum lieferbar. Diese Wind-
schirme erzeugen keine störenden Resonanzen.
Sie beeinflussen die Richtcharakteristik und das
Übertragungsmaß im oberen Frequenzbereich nur
geringfügig.
Die Dämpfung des Windgeräusches wurde ohne
elektrischen Filter gemessen, in verwirbelter
Luftströmung der Geschwindigkeit 20 km/h, er-
zeugt von einer geräuschlos arbeitenden Windma-
schine.
WNS 100 ............. sw ............ Best.-Nr. 07323
(gehört zum Lieferumfang)
WNS 100 ............. rt ............. Best.-Nr. 07324
WNS 100 ............. gn ............ Best.-Nr. 07325
WNS 100 ............. ge ............ Best.-Nr. 07326
WNS 100 ............. bl ............. Best.-Nr. 07327
WNS 100 ............. ws ............ Best.-Nr. 07328
Windschutz für KM 100 und Series 180. Dämpfung
des Windgeräusches 18 dB. Dämpfung bei 15 kHz
2 dB. Ø 45 mm.
WNS 110 ............. sw ............ Best.-Nr. 08535
Akustisch transparenter Wind- und Nahbespre-
chungsschutz für KM 100 und Series 180, mit er-
höhter Effizienz. Dämpfung des Windgeräusches
21 dB. Dämpfung bei 15 kHz ca. 1 dB. Ø 45 mm,
Länge 70 mm. Farbe schwarz.
WS 100 ............... sw ............ Best.-Nr. 06751
Windschutz für KM 100 und Series 180. Dämpfung
des Windgeräusches 23 dB. Dämpfung bei 15 kHz
4 dB. Ø 90 mm. Farbe schwarz.
Popschutz
Popschirme bieten einen sehr wirksamen Schutz
vor den sogenannten Popgeräuschen. Sie bestehen
aus einem runden, dünnen Rahmen, der beidsei-
tig mit schwarzer Gaze bespannt ist.
Popschirme sind an einem etwa 30 cm langen
Schwanenhals montiert. Eine Klammer mit einer
Rändelschraube an dessen Ende dient der Befes-
tigung am Mikrophonstativ.
PS 15 .................. sw ............ Best.-Nr. 08472
Der Rahmendurchmesser beträgt 15 cm.
*)
Weitere Artikel sind im Katalog „Zubehör“ beschrieben.