Specification Sheet

Acoustical operating principle: Pressure gradient transducer
Directional pattern: Cardioid
Frequency range: 20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm: 23 mV/Pa
Rated impedance: 50 ohms
Rated load impedance: 1 kohms
Equivalent noise level, CCIR
1
): 17.5 dB
Equivalent noise level, A-weighted
1
): 7 dB-A
Signal-to-noise ratio, CCIR
1
) (rel. 94 dB SPL): 76.5 dB
Signal-to-noise ratio, A-weighted
1
) (rel. 94 dB SPL): 87 dB
Maximum SPL for THD 0.5%
2
): 138 dB
Maximum output voltage: 13 dBu
Supply voltage (P48, IEC 61938): 48 V ± 4 V
Current consumption (P48, IEC 61938): 3 mA
Matching connector: XLR3F
Weight: approx. 450 g
Diameter: 60 mm
Length: 132 mm