I M M ER SE R EV ER BER ATOR MK II
IMMERSE REVERBERATOR MK II USER GUIDE Thank you for purchasing our product. We really mean it. We hope to earn your trust by delivering a quality product that inspires you to make great music. Neunaber products are designed and manufactured in Orange, California USA. Please visit www.neunaber.net for more information and support.
INTRODUCTION The Immerse Mk II represents the very best in pedal reverberation — with studioquality algorithms, high-fidelity circuitry, heavy-duty components and construction — all in a small footprint.
SIGNAL CHAIN Q: Where do you place this effect? A: Reverb sounds best at the end of the chain. modulation delay OR overdrive distortion EFFECTS LOOP Using the drive channel of your amp? Connect reverb in the effects loop. Note: Enable kill dry for parallel FX loops only.
CONNECTIONS MON O OUT MONO IN 1 1 2 2 STEREO OUT ST E R E O I N 1 1 2 2 OR OR STEREO OUT MONO IN 1 1 2 2 OR S U MMED MON O O UT ST E R E O I N 1 1 2 2 OR TS (tip-sleeve) TRS (tip-ring-sleeve) no connection
CONNECTIONS The Power Jack accepts a standard (5.5 mm OD x 2.1 mm ID) center-negative pedal power adapter (not included). The power adapter must be between 9 V and 12 V and capable of supplying 80 mA or more. The Input Jacks accept inputs directly from your instrument, amplifier effects loop send, or other effect pedals via standard 1/4” (6.35 mm) phone connectors. Inputs 1 and 2 should not be used with two discrete signals, such as two different instruments.
EFFECTS W3T™ Version 3 of the WET algorithm — our flagship reverb. Smoother decay and more three-dimensional sounding, it enhances what you play without covering it. Adjustable pre-delay further separates the dry signal and reverb up to an additional 200 milliseconds (ms). Plate A physical plate reverb uses transducers mounted to a large, suspended metal plate. It is known for its bright, diffused sound. Adjustable pre-delay further separates the dry signal and reverb up to an additional 200 ms.
EFFECTS Sustain Echo ↓tune Shim Built on our W3T reverb, Sustain is a magical effect that can be configured as a sustain effect or virtually infinite reverb. What you play is recycled in an infinite loop during a ”hold” phase, then decays out during a “release” phase. The Time knob adjusts the hold time, while the Depth knob adjusts the release. The Mod knob controls the modulation depth. This effect adds echo and reverb. The Time knob adjusts the echo time, from 50 to 700 ms.
CONTROLS Mix The Mix knob adjusts the blend of dry (unaffected) signal to effect and ranges from 100% dry to 100% effect. Effect The center knob selects the reverb effect. The knobs below may change function depending on the selected effect. Depth The Depth knob controls the reverb depth (also called decay time). When the Echo effect is selected, it also controls the number of repeats (regeneration).
EXAMPLE SETTINGS Dreamland mix A Touch of Class depth mix W 3T tone pre-dly Arena Rock mix W 3T tone pre-dly Subtle Thickening depth mix plate tone depth pre-dly depth plate tone pre-dly
EXAMPLE SETTINGS Vibrato Spring mix Big Bright Spring depth mix sprin sprin g g tone mod tone mod Americana Echoes mix ec ec time depth ho depth ho mix depth blend time blend
EXAMPLE SETTINGS Modulated Hall mix Infinite depth mix ha sust ll ain depth tone mod time Sustain Soundscape mix sust sust time depth ain depth ain mix mod mod time mod
EXAMPLE SETTINGS 1980 mix Ambient depth mix depth shim ← tune tone blend tone Airy mix Synth Pad depth mix shim tone blend depth shim blend tone blend
SPECIFICATIONS Electrical Nominal input level -10 dBV (instrument / consumer line level) Max input level 7 dBV using 9 V power supply Input impedance 1.175 MΩ (mono), 2.35 MΩ (stereo) Output impedance 500 Ω (mono), 1 kΩ (stereo) Gain, enabled vs. bypass unity Frequency response 20 Hz—20 kHz, +/-0.5 dB, dry signal or bypassed Total harmonic distortion < 0.
At Neunaber, we love to see what you guys do with your ‘toys’. We encourage you to tag us in your posts, pictures & videos featuring your Neunaber gear! To stay connected, go ahead and follow us on the channels seen below. We can’t wait to see what you do! @NeunaberAudio Neunaber Audio This product contains no user-serviceable parts. This device complies with part 15 of the FCC Rules.
WWW. NEUNA BER .
