User Manual

CONNECTIONS

The Power Jack accepts a standard (5.5 mm OD x 2.1 mm ID) center-negative

pedal power adapter (not included). The power adapter must be between 9 V and

12 V and capable of supplying 80 mA or more.

The Input Jacks accept inputs directly from your instrument, ampliﬁer eects

loop send, or other eect pedals via standard 1/4” (6.35 mm) phone connectors.

Inputs 1 and 2 should not be used with two discrete signals, such as two dierent

instruments.

The Output Jacks supply output to another eect pedal, an ampliﬁer, or eects

loop return via standard 1/4” (6.35 mm) phone connectors. The output is buered

and capable of driving long cables.

SWITCHES

The Footswitch engages the eect, and the LED lights when the eect is active.

There are two mini-switches next to the Power jack:

• Kill Dry removes the dry signal, even when bypassed. This should be enabled

for parallel eect loops and disabled for serial (common) eect loops.

• Trails allows the eect to naturally trail after the pedal is bypassed. With

normal bypassing, the eect is abruptly cut o; however, normal bypassing

results in lower noise while the pedal is bypassed.