User Manual

MIDI
Unless specified otherwise, the MIDI OUT functions as a soft THRU,
echoing the MIDI IN.
Channel
The default MIDI channel is 1 but may be changed to any channel 1-16 via System
Exclusive Command or as follows:
Disconnect power
Hold down the Engage switch and reconnect power
Send any MIDI command containing the channel number to which to set
Neuron
Release the Engage switch
Program Change
Program Change numbers 0 - 24 are recognized; 25 - 127 are ignored.
Control Change
The default CC (control change) numbers are shown in the following chart.
These numbers may be remapped to any CC number between 0 - 119 via System
Exclusive Command. Multiple parameters may share a CC number.