Quick Start Guide

©NeuroTek 2021 Version 2.0
C. Do you have a wireless headset? If yes, continue below, if not
continue to step D.
o
Ensure your headset is charged using either the USB
cord that comes with the headset of the AC adapter that
came with the Tac
o
Press the play/pause button on headset until the blue/
red light ashes
o
On your Tac, select Settings
o
Select Wireless Headset – it will automatically scan for
the headset
o
When the scan is nished, you should see NeuroTek.
Select NeuroTek – you should see a check mark – If you
don’t see NeuroTek - rescan
o
Then Select Connect – And you should see OK next to
NeuroTek
o
Back out to the main menu and you should see
Headphones in your list of connected devices.
o
To turn o your headset, just press the pause play
button until you hear a sound, which will let you know
it’s powered o.
©NeuroTek 2020
Bluetooth
®
Headset Controls
➊
On/O, Volume Up, and Volume Down
Volume Up Volume Down
Power On/O
➋
Charging and Bluetooth
®
Status
Bluetooth
®
ON
light
Charging Port
©NeuroTek 2020
Bluetooth
®
Headset Controls
➊
On/O, Volume Up, and Volume Down
Volume Up Volume Down
Power On/O
➋
Charging and Bluetooth
®
Status
Bluetooth
®
ON
light
Charging Port