Quick Start Guide

©NeuroTek 2020 Version 2.0
5
Edit Proles
To edit the proles, you would want to have all your
accessories (the pulsers, headset and EyeScan if applicable)
connected to the Tac in order to adjust the settings for all
devices. Once they are connected, you would follow the
following steps:
o
From the main menu, SelectProles
o
You will then see Resource (which is set at slower
speeds) and Reprocessing (which is set at higher speed).
SelectEditnext to the one you want to change, and then
select Start.
o
It will walk you through the settings for each device,
(pulsers, headset, and EyeScan if applicable).
o
Once completed, press Save and your changes should be
saved at this point.
o
From the main menu, select theprolethat you made
changes to, Resource or Reprocessing and then Start, and
you should see the changes in yourprole.