Manual
NEUSPEED® • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX • information@neuspeed.com • Visit us on the web…http://www.neuspeed.com
20. Remove rubber grommet from lower air box and install into
hole of supplied support bracket – long.
21. Install bracket onto rear mount for factory air box and bolt
to hole on P-Flo bracket with SS screw and lock nut
supplied.
22. Connect electrical connector to the MAF.
23. Install weather strip on to edge of P-flo bracket, then install
NEUSPEED filter.
24. Installation is now complete. Double-check tightness of all
connections and test drive carefully. NOTE: Double-check
all clamps and connections after 1 week of driving.
Copyright 2010, NEUSPEED
®
. All rights reserved. Reproduction in whole or in part prohibited.
DOC.65.02.67 Rev. 12.30.10