Manual

1.
2.
Assembly Instruction
Open lever.
Place boot into the fixture.
Press connector and boot together by lifting the lever.
Insert already soldered connector.
A
B
C
D
2. Connector assembly steps:
“Speed boot” of XLR connectors may damage the XLR boot thread.
It's usually not possible to re-open the boot without a tool after assembly.
Note:
D
A
C
B
D
Modification of the pre-adjustment may be necessary
because of cable diameter or usage of the XXCR clear
coding ring with the XX Series.
Insert the lever into the hole.
Fixing it with the screw.
1.
1. Tool installation:
2.
ASSEMBLY INSTRUCTION
www.neutrik.com
NEUTRIK AG
NEUTRIK Zürich AG
NEUTRIK USA Inc.
NEUTRIK UK Ltd.
()
LI
CH
USA
UK
T: F:
T: F:
T: F:
T: F:
+423 / 237 24 24 +423 / 232 53 93
+41 44 / 736 5010 +41 44 / 736 5011
+1 732 / 901 9488 +1 732 / 901 9608
+44 1983 / 811 441 +44 1983 / 811 439
NEUTRIK
NEUTRIK France
NEUTRIK Tokyo Ltd.
NEUTRIK
Vertriebs GmbH
Ltd.Hong Kong
DE / NL/ AT
FR
JP
HK
T: F:
T: F:
T: F:
T: F:
+49 8131 / 280 890 +49 8131 / 280 830
+33 1 / 4131 6750 +33 1 / 4131 0511
+81 3 / 3663 4733 +81 3 / 3663 4796
+852 / 2687 6055 +852 / 2687 6052
Draft. Nr.: BDA 176 Update: 02.04.2009/ 3102M1461
II
Data subject to change without prior notice. 2009NEUTRIK . ALL RIGHTS RESERVED.©
®
BTXX “Speed boot” assembly tool for XX Series
XLR Connectors.
|