Manual

ASSEMBLY INSTRUCTIONASSEMBLY INSTRUCTION
NP2RX-TIMBRE 1/4" Guitar - timbrePLUG
|
R
Page 1
Slide the boot onto the cable.
Position the red cover next to the shell:
Solder the red cable (TIMBRE)
combined with the hot wire to the TIP
lug.
Solder the SHIELD to the ground lug.
Position the cover on the shell (D) and fix it
with the screw (E).
Prepare cable as shown.
A
B
C
4
[ ]
0.16”
20
[ ]
0.78”
10
[ ]
0.39”
D
Shield
Tip
timb
r
eP
LU
G
E
2.
Shield
Tip
TIMBRE
1.
1.
2.