Manual

How to use the "SHIELD-SPREADING-TOOL"

Take the prepared cable into your left hand and the shield-spreading-tool

between your fingers of your right.

Position the straight wire-parts of the clamp over the screen at the end of the

jacket, you can use the jacket as a block-shoulder.

Press the tool with your fingers together and turn the cable around. You will

see that the screen get spread off easily and does not effect the foil at all.

CLAMP POSITION

SHIELD-SPREADING-TOOL

ASSEMBLY INSTRUCTION

Draft. Nr.: Update: 02.04.20093102M0791

www.neutrik.com

NEUTRIK AG

NEUTRIK Zürich AG

NEUTRIK USA Inc.

NEUTRIK UK Ltd.

()

USA

T: F:

+423 / 237 24 24 +423 / 232 53 93

+41 44 / 736 5010 +41 44 / 736 5011

+1 732 / 901 9488 +1 732 / 901 9608

+44 1983 / 811441 +44 1983 / 811 439

NEUTRIK

NEUTRIK France

NEUTRIK Tokyo Ltd.

NEUTRIK

Vertriebs GmbH

Ltd.Hong Kong

DE / NL / AT

T: F:

+49 8131 / 280 890 +49 8131 / 280 830

+33 1 / 4131 6750 +33 1 / 4131 0511

+81 3 / 3663 4733 +81 3 / 3663 4796

+852 / 2687 6055 +852 / 2687 6052

PAGE 1
ASSEMBLY INSTRUCTION SHIELD-SPREADING-TOOL CLAMP POSITION How to use the "SHIELD-SPREADING-TOOL" Take the prepared cable into your left hand and the shield-spreading-tool between your fingers of your right. Position the straight wire-parts of the clamp over the screen at the end of the jacket, you can use the jacket as a block-shoulder. Press the tool with your fingers together and turn the cable around. You will see that the screen get spread off easily and does not effect the foil at all.