Manual

Slide the boot onto the cable.
Solder the wire ends in the order Sleeve and Ring.
Position the chuck onto the cable and align chuck
with plugfinger.
Finish the installation by tighten the bushing onto
the connector.
Attention:
If using a cable with O.D. > 5.50 mm [0.216”] break off
marked partof the chuck.
Prepare cable as shown.
Push the cover to the stop position on the shell.
A
B
C
E
F
A
D
B
C
4
[
0.16”
][
0.16”
]
20
[
0.78”
][
0.78”
]
10
[
0.39”
][
0.39”
]
F
D
break off
E
ASSEMBLY INSTRUCTION
NP2RX-AU-SILENT 1/4” Professional Right Angle
Phone Plug
|
NEUTRIK AG
NEUTRIK Zürich AG
NEUTRIK USA Inc.
NEUTRIK UK Ltd.
T: F:
T: F:
T: F:
()
T: F:
LI
CH
USA
UK
+423 / 237 24 24 +423 / 232 53 93
+41 44 / 736 5010 +41 44 / 736 5011
+1 732 / 901 9488 +1 732 / 901 9608
+44 1983 / 811441 +44 1983 / 811 439
Draft. Nr.: BDA 181 Update: 28.09.2009/ 3102M1521
II
Data subject to change without prior notice. 2009NEUTRIK . ALL RIGHTS RESERVED.©
®
NEUTRIK
NEUTRIK France
NEUTRIK Tokyo Ltd.
NEUTRIK
Vertriebs GmbH T: F:
T: F:
T: F:
Ltd. T: F:
DE / NL/ AT
FR
JP
HK
+49 8131 / 280 890 +49 8131 / 280 830
+33 1 / 4131 6750 +33 1 / 4131 0511
+81 3 / 3663 4733 +81 3 / 3663 4796
+852 / 2687 6055 +852 / 2687 6052
Hong Kong
www.neutrik.com

Summary of content (1 pages)