Owner manual

Prepare cable as shown.
Insert the wires into the terminals
and solder it.
Wiring of the Receptacle and the Female Cable Connector:
A
B
A
B
[0.32"]
8mm
[0.79"]
20 mm
Assembly of the Cable Connector:
A
B
C
D
E
A
B
C
D
E
2+ 2-
1- 1+
[0.32"]
8mm
[0.79"]
20 mm
Place bushing and chuck over the cable.
Prepare cable as shown.
Solder the wire ends to contacts of insert.
Slide the chuck up the cable and align with the
housing.
Slide the bushing up the cable and tighten it
(flat wrench SW 22mm).
Important:
Important:
Align the chuck by positioning the
nose into the smaller recess.
Bushing must be screwed onto housing
minimum 3 turns thus there is no gap between
housing and bushing.
NO
YES
speakON STX Series Lockable Loudspeaker Connector
4
|
pole Cable Connector with metal housing
ASSEMBLY INSTRUCTION
Draft. Nr.: BDA 118 Update: 29.09.2009/ 3102M1181
II
Data subject to change without prior notice. 2009 NEUTRIK . ALL RIGHTS RESERVED.©
®
www.neutrik.com
2+
1-
2-
1+
NEUTRIK AG
NEUTRIK USA Inc.
NEUTRIK UK Ltd.
NEUTRIK
T: F:
T: F:
()
T: F:
T: F:
LI
USA
UK
DE/NL/AT/DK
+423 / 237 24 24 +423 / 232 53 93
+1 732 / 901 9488 +1 732 / 901 9608
+44 1983 / 811441 +44 1983 / 811 439
+49 8131 / 280 890 +49 8131 / 280 830
Vertriebs GmbH
NEUTRIK France
NEUTRIK Tokyo Ltd.
NEUTRIK
FR
JP
HK
T: F:
T: F:
Ltd. T: F:
+33 1 / 4131 6750 +33 1 / 4131 0511
+81 3 / 3663 4733 +81 3 / 3663 4796
+852 / 2687 6055 +852 / 2687 6052
Hong Kong
R
R
IMPORTANT SAFETY INSTRUCTION
Electrical Rating acc. UL & CSA:
USR: 40A/250V, CNR: 25A/250V
“CAUTION: NOT FOR INTERRUPTING CURRENT”
ATTENTION: NE PAS UTILISER POUR COUPER LE COURANT”
“