User Manual

Open metal zipper and attach the strain relief on

the cable as illustrated on pic A.

Attention: Make sure that the strain relief is

between the two velcro straps.

opticalCON FOPS-SINGLE Pulling Sock

Page 1

HANDLING INSTRUCTION

Due to the strain relief is the center element for the

pulling force, it's important to tighten the cable tie.

With tighten the velcro straps, fix the attached

strain relief and cable on the opticalCON pulling

sock.

Close metal zipper and tighten velcro strap to

enhance cable retention of the entire pulling sock.

FINISH

PREPARATION

PAGE 1
R HANDLING INSTRUCTION opticalCON | FOPS-SINGLE Pulling Sock PREPARATION A A Open metal zipper and attach the strain relief on the cable as illustrated on pic A. Attention: Make sure that the strain relief is between the two velcro straps. B B Due to the strain relief is the center element for the pulling force, it's important to tighten the cable tie. C C With tighten the velcro straps, fix the attached strain relief and cable on the opticalCON pulling sock.
PAGE 2
opticalCON - Handling Instruction I Pulling Sock - Storage STORAGE A A Reel cable with attached pulling sock flat on the used cable drum. B B Secure opticalCON pulling sock with the black hook on the metal grommet. NOTE: The proper length of the elastic cord can be individual adjusted according the oute diameter of the used drum. FINISH NEUTRIK NEUTRIK NEUTRIK NEUTRIK AG USA Inc. (UK) Ltd. Vertriebs GmbH LI USA UK DE / NL / AT/DK Draft. Nr.