User Manual

2
0
25
0
P
S
E
J
E
T
1
6
25
0
2
0
2
50
NA
C3
M
X-
W
2
0
2
5
0
P
S
E
J
ET
16
25
0
2
0
25
0
N
AC 3
M
X
-
W
Draft. Nr.: BDA 380 / 3102M2191 Update: 11.10.2013
I I
Data subject to change without prior notice. 2013 NEUTRIK . ALL RIGHTS RESERVED. NEUTRIK are registered trademark.
® ®
©
R
NEUTRIK AG LI T: +423 / 237 24 24 F: +423 / 232 53 93
NEUTRIK USA Inc. USA T: +1 732 / 901 9488 F: +1 732 / 901 9608
( )
NEUTRIK UK Ltd. UK T: +44 1983 / 811 441 F: +44 1983 / 811 439
NEUTRIK Vertriebs GmbH DE / NL / AT/DK T: +49 8131 / 280 890 F: +49 8131 / 280 830
NEUTRIK France FR T: +33 1 / 4131 6750 F: +33 1 / 4131 0511
NEUTRIK Tokyo Ltd. JP T: +81 3 / 3663 4733 F: +81 3 / 3663 4796
NEUTRIK Hong Kong Ltd. HK T: +852 / 2687 6055 F: +852 / 2687 6052
ASSEMBLY INSTRUCTION powerCON TRUE1
I
R
Torque Value 0.7 Nm
5.
Torque Value 2.0Nm
PRESS FIRMLY
Torx size
T8
1.
2.
4.
Wrench size
13 mm
Slide the cable into the contacts and clamp with
the screw with Torx size T8.
Wiring VDE UL
Slide chuck onto insert (1) and then both into
housing (2).
Slide the cable clamp bushing up the cable and
tighten it with the tool as shown.
(Tool available: Art. No. HTAC)
L brown black
N blue white
green / yellow green
Þ
Þ
Þ
Important: Align the chuck by positioning the
nose into keyway.
Important: Yellow O-ring to hide to achieve IP
protection (6).
6.
www.neutrik.com
3.
Important:
Push and turn simultaneously.
Disassembly (open twist lock):
1. Press with screw driver to unlock
2. Turn bushing while still pressing locking.
1.
2.
CAUTION
To ensure protection
category, do not expose
the connection to
bending forces (e.g. do
not attach loads to the
cable, no free-dangling
cable windings etc.).
LIEC
HT
EN
S
T
EIN
20
250
P S
E
J
ET
FORCE
G
E
F