Instruction Manual

Draft. Nr.: BDA 100 Update: 04.02.2013/ 3102M0861
II
Data subject to change without prior notice. 2013 NEUTRIK . ALL RIGHTS RESERVED. NEUTRIK are registered trademark.©
® ®
ASSEMBLY INSTRUCTION
www.neutrik.com
etherCON NE8MC, Ruggedized RJ 45
Data Connector
|
standard version
A
Special version: remove cover
Cut off release tab of RJ 45 plug
Slide the bushing over the connector onto the
cable.
Put the suitable boot on the cable:
D1 for cable O.D. 5mm (0.2”)
D2 for cable O.D. 8mm (0.3”)
Put chuck onto the cable.
Standard version:
Position the ring on the cable end
(flush to the face).
Special version:
If applicable press the adapter into the port.
In combination with ( E ) the position clamp ( F1)
can but must not be used depending to the
design of the RJ 45 plug.
Slide the connector into the housing.
the connector latch has to point
downwards (opposite direction of RJ45 lettering
Slide the chuck in the housing
(Pay attention to the guiding key).
Slide the bushing and boot to the housing and
tighten the bushing.
Close the seal of the boot.
Pay attention:
CAUTION:
l
l
£
£
A
B
C
F
D
special version
B
C
D
E
or
E
C
D1
D2
D
F
G
H
I
G
H
I
standard version
special version
F1
RJ45
G
H
I
J
or
K
J
J
K
RJ45
NEUTRIK AG
NEUTRIK USA Inc.
NEUTRIK UK Ltd.
NEUTRIK
T: F:
T: F:
()
T: F:
T: F:
LI
USA
UK
DE/NL/AT/DK
+423 / 237 24 24 +423 / 232 53 93
+1 704 / 972 3050 +1 704 / 438 9202
+44 1983 / 811 441 +44 1983 / 811 439
+49 8131 / 280 890 +49 8131 / 280 830
Vertriebs GmbH
NEUTRIK France
NEUTRIK Tokyo Ltd.
NEUTRIK
FR
JP
HK
T: F:
T: F:
Ltd. T: F:
+33 1 / 4131 6750 +33 1 / 4131 0511
+81 3 / 3663 4733 +81 3 / 3663 4796
+852 / 2687 6055 +852 / 2687 6052Hong Kong
R
R
max. 0.25 mm
E