User Manual

Open metal zippe and put the fan-out of the used

opticalCON split cable inside the pulling sock.

opticalCON FOPS-SPLIT Pulling Sock

Page 1

HANDLING INSTRUCTION

To avoid stronger tensile force on the connector,

the split housing has to be placed directly behind

the integrated velcro strip!

Close metal zipper to protect the opticalCON

connectors from heavy contamination as mud and

dirt.

Tighten the velcro strap to secure the split housing

and pulling sock.

FINISH

POSITIONING

PAGE 1
R HANDLING INSTRUCTION opticalCON | FOPS-SPLIT Pulling Sock POSITIONING A A Open metal zippe and put the fan-out of the used opticalCON split cable inside the pulling sock. B B To avoid stronger tensile force on the connector, the split housing has to be placed directly behind the integrated velcro strip! C C Close metal zipper to protect the opticalCON connectors from heavy contamination as mud and dirt. D D Tighten the velcro strap to secure the split housing and pulling sock.
PAGE 2
opticalCON - Handling Instruction I Pulling Sock - Storage STORAGE A A Reel up attached lettered pulling sock on the cable drum. B B Secure opticalCON pulling sock with the black hook on the metal grommet. NOTE: The proper length of the elastic cord an be individually adjusted according the outer diameter of the used drum. C If the elastic cord is not required hook it onto the C cotton grommet inside the opticalCON pulling sock. FINISH NEUTRIK NEUTRIK NEUTRIK NEUTRIK AG USA Inc. (UK) Ltd.