Information

87
www.neutrik.com
BST-BNC-* BS-BNC-* HX-BNC DIE-BNC-*
HT-BNC DSS
SCF SCDX
Accessories
Boots, tools, ...
BNC tool case equipped with
- HX-R-BNC
- PT-BNC: Plier tool
- CS-BNC: Stripping tool
HX-R-BNC DIE-R-BNC-*CAS-BNC-T Note: Dies have to be ordered separately.
Crimp tool, frame
Crimp tool die for pin and
shield for HX-R-BNC
Boot for Push-Pull BNCs in black,
9 different colours available, as
well as 3 translucent variants.
Crimp tool, frame. (heavy duty) Crimp tool die for pin and shield
for HX-BNC.
Spanner tool for the Push-Pull
BNCs.
Lettering plate for D Shape-
bulkheads.
Crimp die Hex crimp Hex crimp Center pin
mm inch mm
A B C A B C (square crimp)
DIE-R-BNC-PDC 6.47 4.53 4.06 0.255 0.178 0.160 1.6
DIE-R-BNC-PG 6.47 5.00 - 0.255 0.197 - 1.6
DIE-R-BNC-PJ 6.47 5.41 - 0.255 0.213 - 1.6
DIE-R-BNC-PS 6.47 7.01 - 0.255 0.276 - 1.6
DIE-R-BNC-PU 6.47 7.36 - 0.255 0.290 - 1.6
DIE-R-BNC-PY 6.47 8.23 - 0.255 0.324 - 1.6
DIE-R-BNC-Z 9.73 - - 0.383 - - 1.75
(Hex crimp)
Crimp die Hex crimp Hex crimp Center pin
mm inch mm
A B A B (square crimp)
DIE-BNC-CS 4.06 7.01 0.160 0.276 1.6
DIE-BNC-JD 5.41 4.53 0.213 0.178 1.6
DIE-BNC-PG 6.47 5.00 0.255 0.197 1.6
DIE-BNC-U 7.36 - 0.290 - 1.6
DIE-BNC-UG 7.36 5.00 0.290 0.197 1.6
DIE-BNC-Y 8.23 - 0.324 - 1.6
Standard boot for the Rear Twist
®
BNCs in black, 9 different colours
available.
Rubber sealing cover to protect
the connector agains dust and
moisture
Hinged cover seals D-size chas-
sis connectors, IP42 rated
Crimp die assignment for HX-BNC Crimp die assignment for HX-R-BNC