Data Sheet

37
BSP-*
BSTT-* BSTP-* PCR-*
BPX-* PXR-*
Technical Data
Specifications
1/4" Phone Plugs MIL / B-gauge Type 0.173" Bantam Type 3.5 mm Stereo Plugs
SILENT & CRYSTAL
Electrical
Mechanical
Environmental
Materials
Accessories
Rated current: depends on mating connector zz z z
Contact resistance: depends on mating connector zz z z
Insulation resistance: - initial:
>
2 G7 zz z z
- after damp heat test: r 1 G7 zz z z
Dielectric strength 1 kV dc zz z z
Shell: Zinc diecast Brass Brass (CuZn39Pb3) Zinc diecast
(ZnAl4Cu1) Ni or (CuZn39Pb3) 2
µm Ni (Su) plated (ZnAl4Cu1) Ni or
black Cr plated black or red coated PA 6 30 % GR black Cr plated
Insulation: Polyamide (PA 6.6 30 % GR) zz zPA 6.6 15% GR
Contacts: Brass (CuZn39Pb3) zzz (Tip: CuSn6) z
2 µm Ni (Su) or Au plated
zz
or Brass 2 µm TRIBOR
®
(NiP-AuCo)
z
Chuck: POM POM - POM
Bushing: POM + PU - - CuZn39Pb3 + PU
(Ni or black Chrome)
Rubber shell-overlay: EPDM - - -
Lifetime
>
1'000 mating cycles zz z z
Wiring: solder terminals zz z z
Wire size
mm
2
1 1 (NP3CM: 0.5) 0.25 0.22
AWG 18 18 (NP3CM: 20) 24 24
Cable O.D.: mm 4 - 7 4 - 7 4.8 max 2 - 4.5
BSP-* Coloured bushing for NP*C Series BSTP-* Coloured sleeves for NP3TT-P Series
BPX-* Coloured bushing for NP*X Series PXR-* Coloured marking rings for NP*X Series
BPX-L Large bushing for NP*X Series up to 8.0 mm cable O.D. PCR-* Coloured marking rings for NP*C Series
BSTT-* Coloured sleeves for NP3TT Series
*: 0 - Black, 1- Brown, 2 - Red, 3 - Orange, 4 - Yellow, 5 - Green, 6 - Blue, 7 - Violet, 8 - Grey, 9 - White; Must be ordered in multiples of 100.
Assembly tool
HX-TT-1 Assembly and crimp tool for NP3TT-1/AU
HX-R-BNC HEX crimp tool for NP3TT-P*
DIE-R-BNC-PJ HEX crimp die for NP3TT-P* (5.4 mm)
HTXP Hand tool to tighten the PX and XX-bushing
HT-PXS Hand tool to hold shell of PX Plug
Temperature range: -20 °C to +65 °C
zz z z
Solderability: Complies with IEC 68-2-20 zz z z
www.neutrik.com