User manual

Slide bushing ( 1 ) and chuck ( 2) onto the cable end.
Less 15 mm please use reducing piece (3).
Prepare cable as shown.
Consider excessive length of PE conductor for
slackening.
Strip the wires.
If cable O.D.:
ASSEMBLY INSTRUCTIONS CABLE CONNECTOR
|
A
B
A
[0.354"]
9mm
FEATURES
250 Vac, 32 Amp (at ambient temperatures up to 35°C) / 30 Amp for cUR
Cable O.D. 17 mm (general range: 8.0 to 20.0 mm)
Wiring: Cable Connector: Screw-type terminals for stranded wires 6.0 mm (AWG 10)
Chassis Connector: Screw-type terminals for wires 6.0 mm (AWG 10)
2
2
·
·
·
IMPORTANT SAFETY INSTRUCTION
Attention: Connector without breaking capacity acc. IEC 61984 - must not be engaged or
disengaged when under load or live.
Insert wires into terminals L, N, PE and tighten.
ATTENTION: Max torque 180 cNm
Wiring: *
C
1
2
25 mm 15 mm
C
3
1.
2.
SAFETY & ASSEMBLY INSTRUCTION
PowerCON HC Locking 2P+PE AC appliance coupler
®
|
Page 1
L
Black
N
White
PE
Green
TORX TX 10
socket screws
®