User Manual

INSTRUCTION

powerCON

TRUE1 TOP

Page 1BDA 556

1. CONNECTING

Cable Connector

Note:

The proper twist-lock

is achieved when the

silvery tab is in the

position shown in C

and an audibel «click»

is heard.

click

Note:

After inserting properly

as in illustration A ,

twist the cable

connector clockwise to

lock.

Note:

When connecting, match the notch

on the cable connector to the

corresponding guide slot on the

chassis.

SAFETY WARNING

incorrect insertion may cause electrical contact

misalignmentresultinginequipmentmalfunction

and/orpersonalinjury.

max. 1 Newton

PAGE 1
R INSTRUCTION powerCON TRUE1 TOP Cable Connector ® 1. CONNECTING max. 1 Newton A Note: When connecting, match the notch on the cable connector to the corresponding guide slot on the chassis. incorrect insertion may cause electrical contact misalignment resulting in equipment malfunction and/or personal injur y. C B Note: After inserting properly as in illustration A A , twist the cable connector clockwise to lock.
PAGE 2
powerCON TRUE1 TOP I OPERATING INSTRUCTION ® 2. UNLOCKING A C B Application: The power CON TRUE1 TOP system is certified as a connector with breaking cap ac ity according to IEC 60320, VDE 0625. It is intended to use as an appliance coupler and interconnection coupler. It serves to supply power to an appliance and from an appliance to other equipment. To be installed by qualified personnel only.