Information
106
Technical Data
Specification PowerCon
®
32 A PowerCon
®
NanoCon
®
MiniCon
®
NeutriCon
®
Series Series Series Series Series
Electrical
Mechanical
Material
Housing cable connector:
PA 6 30% GR PA 6 30% GR CuSn4Pb4Zn4 ZnAl4Cu1 / CuZn39Pb3 ZnAl4Cu1
gal Ni or black chrome
Housing receptacle: PA 6 30% GR PA 6.6 25% GR CuZn39Pb2 ZnAl4Cu1 ZnAl4Cu1,
gal Ni or black chrome
Insert: PA 6 30% GR PA 6.6 25% GR PETP PA 6.6 PBTP 15% GR
Contacts: CuZn39Pb3 / CuSn6 CuZn39Pb3 / CuSn0.2 CuZn35Pb2 CuZn35Pb2 (solder) CuZn35Pb2 (solder)
CuZn39Pb3 (crimp) CuZn39Pb3 (crimp)
CuSn6
Contact surface: 4 µm / 20 µm Ag plated 4 µm Ag 0.5 µm Au 0.2 µm AuCo 0.3 µm Au hard
alloy over 2 µm Ni
Chuck POM:
z
z
z
z
z
Environmental
Flammability UL 94 HB:
zz
plug housing
UL 94 V-0 UL 94 V-0
z
Flammability UL 94 V-0: -
z
socket housing + plug insert
---
Temperature range: -30°C to +80°C
zzzzz
Protection class (mated): IP 20 IP 2X unmated IP 40 IP 5X IP5X
Safety Requirements EN/IC61984:
zz
---
Number of contacts:
2 + PE 2 + PE 3 12
(1-12 modular system)
8
(1-8 modular system)
Rated current per contact: 20 A rms 32 A rms 2 A 3 A 7.5 A (solder), 5 A (crimp)
Rated voltage: 250 V ac 250 V ac 50 V ac 50 V ac 50 V ac
Dielectric strength: 4000 V dc 4000 V dc 1000 V dc 1000 V dc 1500 Vdc
Contact resistance:
b
3 m7
b
3 m7
b
12 m7
b
8 m7
b
5 m7
Insulation resistance after
>
100 M7
>
100 M7
>
1 G7
>
500 M7
>
500 M7
damp heat test (IEC 68-2-30):
FASTON
®
is a trademark of AMP Inc.
Retention method: Quick lock Quick lock latch Push-pull Push-pull
Cable O.D. range: 5 - 15 mm 8 - 20 mm 3.4 mm max. 3 - 5 mm (grey chuck) 3 - 7 mm
5 - 7 mm (white chuck) 3 - 3.8 mm (SR8A)
2.5 - 6 mm 6 - 7 mm (SR8B)
(crimp version MSRC)
Wiring:
Cable: screw type screw type terminals
0.2 mm
2
/ 24
AWG
0.5 mm
2
/ 20
AWG
1.0 mm
2
/ 18
AWG
terminals or soldering
2.5-6 mm
2
/ 14-10 AWG
for solid wire for solder for solder
2.5 mm
2
/ 14 AWG
Chassis: flat tabs for FASTON
®
0.14 mm
2
0.22 mm
2
0.14 - 0.34 mm
2
26
AWG
24
AWG
22 - 26
AWG
4.8 x 0.5 mm or soldering for stranded wire for crimp for crimp
Solderability complies with IEC 68-2-20:
z
z
z
z
look for the logo