User Manual

www.neutrik.com
Draft. Nr.: BDA 428 Update: 28.08.2017 Data subject to change without prior notice. 2017 NEUTRIK . ALL RIGHTS RESERVED. NEUTRIK , etherCON is a registered trademark.
I I
® ® ®
©
NEUTRIK AG LI T: +423 / 237 24 24 F: +423 / 232 53 93
NEUTRIK USA Inc. USA T: +1 704 / 972 3050 F: +1 704 / 438 9202
( )
NEUTRIK UK Ltd. UK T: +44 1983 / 811 441 F: +44 1983 / 811 439
NEUTRIK Vertriebs GmbH DE / NL / AT/DK T: +49 8131 / 280 890 F: +49 8131 / 280 830
NEUTRIK France FR T: +33 1 / 4131 6750 F: +33 1 / 4131 0511
NEUTRIK Tokyo Ltd. JP T: +81 3 / 3663 4733 F: +81 3 / 3663 4796
NEUTRIK Hong Kong Ltd. HK T: +852 / 2687 6055 F: +852 / 2687 6052
NEUTRIK India Pvt. Ltd. IND T: +91 / 982 05 43 424 F: +91 / 22 26163 540
etherCON CAT6A - ASSEMBLY INSTRUCTION
R
Position the ground-shells over the wires as shown.
Attention:
Align the coding nibs of the ground shells to the
grooves in between the wire pairs in the wire
management.
F
A. Put the cable-shield over the ground shell and
distribute the shield wires circumferentially.
B. Put the drain wire over the ground shell and wrap
the drain wire circumferentially.
G
Slide the chuck over the cable-shield / drain wire and
the ground shell towards the end-position.
Attention:
Align the slots of the chuck to the ribs of the
ground shell.
H
Slide the pre assembled cable (step G) into the housing.
Attention:
Align the side of the wire management with wire
numbers 1/2, 8/7 to the side of the housing that
has the Neutrik logo and the slot.
Finish the installation by turning the bushing onto the
connector.
Option:
Use the handtool HTXX-14 to tighten the bushing.
7
8
2
1
A
E
F
G
H
I
I
7
8
2
1
A
E
7
8
2
1
A
7
8
2
1
A
D
1. Use HX-CAT6A or pliers wrench to press the wire
management together.
Attention:
Distance between the cable jacket and the wire
management shall not exceed 15 - 17 mm.
2. Cut all wires with a wire cutter.
Allow wires to protrude max. 0.5 mm.
3. Remove the assembly guidance.
1.
1.
D
15 - 17 mm
7
8
2
1
A
2
1
8
7
3.
2.
m
a
x
. 0.
5
mm
7
8
2
1
7
8
2
1
A
7
8
2
1
A
7
8
2
1
A
A
B
B
7
8
2
1
A
B
7
8
2
1
A
B
B
B
A
B
A
B
A
B
7
8
2
1
A
7
8
2
1
A
B
S / FTP & SF / UTP U / FTP
B
Page 2
Find more details of etherCON on www.neutrik.com.