Montage

Slide the boot onto the cable.
Solder the wire ends.
Position the spacer ring (1.) and the chuck (2.) onto
the cable and align chuck with plugfinger.
Slide the housing onto the plugfinger with the
chuck.
Finish the installation by tighten the bushing onto
the connector.
Prepare cable as shown.
Suitable cable O. D. 8 - 10 mm [0.31 - 0.39”]
Attention: Pay attention to the guiding key.
A
B
C
E
F
A
D
B
C
D
E
F
16
4
[
0.63”
][
0.63”
]
[
0.16”
][
0.16”
]
6
[
0.24”
][
0.24”
]
Shield
Tip
Draft. Nr.: BDA 204 Update: 14.06.2010/ 3102M1611
II
Data subject to change without prior notice. 2010 NEUTRIK . ALL RIGHTS RESERVED.©
®
ASSEMBLY INSTRUCTION
www.neutrik.com
NP2XL 1/4” Professional Phone Plug
|
R
R
NEUTRIK AG
NEUTRIK USA Inc.
NEUTRIK UK Ltd.
NEUTRIK
T: F:
T: F:
()
T: F:
T: F:
LI
USA
UK
DE/NL/AT/DK
+423 / 237 24 24 +423 / 232 53 93
+1 732 / 901 9488 +1 732 / 901 9608
+44 1983 / 811441 +44 1983 / 811 439
+49 8131 / 280 890 +49 8131 / 280 830
Vertriebs GmbH
NEUTRIK France
NEUTRIK Tokyo Ltd.
NEUTRIK
FR
JP
HK
T: F:
T: F:
Ltd. T: F:
+33 1 / 4131 6750 +33 1 / 4131 0511
+81 3 / 3663 4733 +81 3 / 3663 4796
+852 / 2687 6055 +852 / 2687 6052
Hong Kong
1.
3.
2.
1.
2.