assembly guide

Slide the boot onto the cable.
Solder the wire ends.
Position the chuck onto the cable and align
chuck with plugfinger.
Slide the housing onto the Plugfinger with
chuck.
Finish the installation by tighten the bushing
onto the connector.
Prepare cable as shown.
Attention: If using a cable with big O.D. break
off marked part on the chuck.
A
B
C
E
F
A
D
B
C
ASSEMBLY INSTRUCTION
NYS 373-* Heavy duty Phono Plug
|
Draft. Nr.: BDA 262-0 Update: 21.01..2010/ 3102M1811
II
Data subject to change without prior notice. 2010 NEUTRIK . ALL RIGHTS RESERVED.©
®
NEUTRIK AG
NEUTRIK USA Inc.
NEUTRIK UK Ltd.
NEUTRIK
T: F:
T: F:
()
T: F:
T: F:
LI
USA
UK
DE/NL/AT/DK
+423 / 237 24 24 +423 / 232 53 93
+1 732 / 901 9488 +1 732 / 901 9608
+44 1983 / 811441 +44 1983 / 811 439
+49 8131 / 280 890 +49 8131 / 280 830
Vertriebs GmbH
www.rean-connectors.com
NEUTRIK France
NEUTRIK Tokyo Ltd.
NEUTRIK
FR
JP
HK
T: F:
T: F:
Ltd. T: F:
+33 1 / 4131 6750 +33 1 / 4131 0511
+81 3 / 3663 4733 +81 3 / 3663 4796
+852 / 2687 6055 +852 / 2687 6052
Hong Kong
6.0 mm [0.24”]
8.0 mm [0.32”]
3.0 mm [0.12”]
1.
2.
break off
D
F
E