Use And Care Manual

Use and Care Guidelines
NeverCurl has a weatherproof adhesive. It can be used on
indoor and outdoor rugs.
Make sure rug is dry before application.
It is recommended that you steam clean your rug with
NeverCurl applied.
If you need to remove NeverCurl, be sure to pull very slowly.
You may find adhesive left on the rug. You may contact your
rug manufacturer to determine best method of removing
stubborn adhesive. Many customer use a product named
“Goo Be Gone.” You may reapply NeverCurl if there is enough
remaining adhesive.
If NeverCurl does not stick properly to your rug, you may
need to clean the rug area with a rubbing alcohol. The rug
may have wax and cleaner residue preventing NeverCurl from
adhering properly.