Operating Instructions

Press , then it will popping “Input Method“ switch interface, as s how n below:
Select the input method you want here.
[Noted] After newly install input method, you should “Settings>Language & input>KEYBOARD & INPUT
METHODS”, then you can use.
1.2.7 Use T-Fl ash Card
Insert T-FLASH card (Card not includ ed)
Insert the T-Flas h card into the slot in direction of the device’s bottom shell until you hear a sound of clic k.
Browse files in the memory card
In this MID device，you can view and use the neede d files in catalogue of “MENU”>”File manager”> “SD
Card”.
1) Remove T-Flash card
Close all open files from the T-Flash, then enter into “MANU>”SETTINGS”>”TF card and & device storage”,
click “Unmount SD card”, System will prompt that TF card was removed safely. Tap w ith your fingertips to the
pop-up T-Flash Card.
[Note] Do not insert the T-FLASH card by force; this card can only be applied in one direction
2) Do not remove the TF card before Unmounted it, or the card may be da maged.
3) If the memory card is write-p rotected, data will not be formatted and written, please remove the write
protection be fore such ope rations.
4) Major brands memory card is recommended to avoid the card is not compatible to this device.
1.2.8 Connected to the Computer
One end the data line connect to the computer, the other end connect the USB port of the device, select
22