User Manual

10000890 REV B
11
4 INSTRUCTIONS FOR USE
4.1 Using the Remote Control
4.1.1 Turning ON the Remote Control
Most of the time, your Remote Control will be OFF to help save battery life. The Remote Control needs to be
turned ON for it to communicate with the Trial Stimulator.
1. Press and hold the small gray ON / OFF Button on the upper left side of the Remote Control for up to five
seconds
2. If the Remote Control turns ON, you will hear one long beep and it will flash all its lights once.
3. The lights on the Remote Control will continue to flash as it tries to establish communication with the Trial
Stimulator.
• If the Remote Control successfully establishes communication with the Trial Stimulator, the lights will
stop blinking and be updated to indicate the current stimulation of your Trial Stimulator.
• If the Remote Control cannot establish communication with the Trial Stimulator, the Remote Control
will beep 3 times, then turn itself off. If this happens, repeat step 1.
• Refer to the Troubleshooting Section of this manual to learn why the Remote Control may be having
difficulties connecting to the Trial Stimulator and what you can do about it.
4.1.2 Turning OFF the Remote Control
The Remote Control turns itself OFF automatically if no buttons are pressed for two minutes. You can also turn
the Remote Control OFF yourself by pressing the gray ON / OFF Button on the upper left side of the device. Note
that even while the Remote Control is OFF, it can still receive alerts from the Trial Stimulator and notify you of the
Trial Stimulator stimulation status.
Remote Control
ON / OFF Button