User Manual

10000890 REV B
13
1. Press and hold the small gray ON / OFF Button on the upper left side of the Remote Control for up to five
seconds to turn the Remote Control ON.
2. To increase stimulation strength, press the Stimulation Increase Button repeatedly until you reach the
stimulation strength you want. To decrease the stimulation strength, press the Stimulation Down Button.
Your doctor has programmed a maximum stimulation strength into the device and it cannot be made to stimulate
more intensely than what was programmed.
4.1.6 Switching Between Programs
Your doctor may have set up your stimulator to offer up to 5 different programs. Follow the directions given to you
by your doctor when switching the program. If you have more than one stimulation program available, you can
change programs as follows:
1. Press and hold the small gray ON / OFF Button on the upper left side of the Remote Control for up to five
seconds to turn the Remote Control ON.
2. Press the Program Selection Button. Each time you press the button, the next available program light will
turn on.
3. When the light above your desired program turns on, stop pressing the Program Selection Button.
If only one program is available, the number for that program will remain lit and you will not be able to change
Stimulation
Increase Button
Stimulation
Decrease Button
Program
Selection Button
Stimulation
Level Indicator